• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

update firmware

  1. Need Help Mimaki cg 160fxII Firmware file

    I just purchased a Mimaki cg-160fxII from a private party. I couldn't get my finecut, Illustrator software to send a file to the plotter. It is communicating with the plotter just won't send a cut file. I spoke with Mimaki and they said I needed to do a firmware update. They took it no further...

  2. Update SP-300v from windowx vista to windows 10. Help

    I purchased a Versacamm SP-300v firmware is 4.2 andcomes with a laptop with windows vista. I really will like to update it to the newest firmware available and windows 10 I am new to this printers and dont know if this is could be done and where to start. Please help!!! Regards Raquel

  3. Mimaki Jv3 Permanent Chips Not Reading

    hi i have a mimaki jv3 160sp and decided to change it over to bulk ink system but im having problems, i am using ss2 ink chips permanent but the printer will not recognize the chips is this due to the firmware on the jv3, the firmware is v6.1 will i need to down grade the firmware if so can were...

  4. Should I upgrade my firmware on CE5000-60 or leave well enough alone?

    Hi, I haven't been here in so long! Everyone here is always so helpful. I am a full time graphic designer and hobby cut vinyl. I have a Graphtec CE5000-60 I purchased new in 2009. I've never updated the firmware on it. It sat in the box for the last two years after a move. I've recently got it...

  5. fc7000 - q130 firmware

    I have the SW q130 plotter that is the same as the fc7000. Because its the OEM version it will not work with Onyx rip and cut. I'm trying to flash the firmware and install the fc7000 firmware, I believe that this is the same machine despite what graphtec would like me to believe. Has anyone...
Top