usb

Wanted Two Flexi 10 Pro or Designer USB keys. We already have program and license for another computer.

Crashes randomly when I send a job on 2nd mimaki, while the 1st is printing. Here is the error report. I can't find anything on the google regarding this JV5 plugin. Any help or insight would be appreciated. Faulting application name: PosterShop.exe, version: 12.2.0.1706, time stamp: 0x59424bce...

Hey guys, first techy question here. I recently discovered our cutter hasn't been updated from the original firmware. Always just used it with OPOS, crossed my fingers and hoped it cut correctly. Mostly tracked off and ruined a ton of media over the years. Well I did the research, updated the...

Hey guys, I recently acquired an old SC500 for free, then bought refurbished heads, new pump, new ink, did full cleaning, and everything seems ready to go......but, it is not connecting with my computer it seems. I am using windows 10, and using one of those usb converters. The converter works...

Hi all My Epson 50610 has been great however recently I have noticed pausing during printing. The higher the passes and even during uni-directional printing, the printer will pause, print , pause, print until the job is complete. It does not start slow but during a long run pauses and becomes...

Hello friends I have a small inconvenience, stolen my pc where I had the drivers and software of my printer Dazzle Jet 3208km luckily I have a Maintop 5.3 Original with key, the problem is that now the new pc asks me for the printer control or a Driver Maintop Usb System Control and I do not...

Advice requested I have recently purchased Vinylmaster to go with my Windoiws 7 Dell 64 bit computer on which I have a serial to USB transfer cable When I press cut the vinyl scrolls back and forth approximately 4 ft before cutting at about a third of the selected font size Grateful for...

Onyx Production House 7.0 with USB dongle - $750. This is legit software(not cracked or pirated). We purchased it new to run a JV3 several years ago. When we bought another printer, it came with a newer version of Onyx and we began using that instead. Call/Text 434-249-4947

Hi Guys, I seem to have a problem with my USB communication between my Mimaki JV33-160 and desktop PC. I have tried several things but still seem to be in the same position. I've tried the below: 1. tested 2 - 3 new cables but no joy 2. tried 2 - 3 different desktop/laptops 3. scanned device...

Hello peeps, I am running Composer software from Omega to run our 60" Summa plotter.It has a security USB dongle which has been damaged and is just holding on by a thread... actually it's duct taped to the computer so it won't move. I am desperately seeking a replacement without having to buy a...

Hey guys... New to the threads here. Maybe someone can help me out. I had an HP9000S years ago and ran it with wasatch 5.3. Everything ran fine for years. We just bought a different used HP9000S and the same wasatch rip does not recognize the new(used) printer. The wasatch rip says the...

I have a Roland pnc-1050 hooked up to my desktop computer via serial port, and I picked up a US Cutter MH871, I can run the Us Cutter off a USB port but I have read about reliability issues, So I was wondering if it was possible to run both of the cutters off Serial with a switch inline ...

We had the misfortune of someone tripping over our USB cable connected to our FC8000 and it bent the tabs in our USB port. When I went to straighten them, one broke off. Called a local dealer and he said the USB is connected to the motherboard and we have to replace the entire motherboard at...

Ich hab ein Problem und komme nicht weiter vielleicht könnten Sie mir weiterhelfen ROLAND CJ-500 Ich habe bereits einen Ausdruck mit dem Drucker über das USB - Paralell Kabel machen können, jedoch war der zweite Druckkopf eingetrocknet so dass ich weder lightmagenta noch yellow bekommen...

I have been reading the forums for a while (you guys are great) and have a question... I just bought a used Anagraph AE-75E plotter, and do not have a serial cord. I would like to hook it up with a serial to usb cord, but somewhere I thought I had read that Anagraph used a connetor that...