• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

vj1204

  1. Need Help Vj1204 Generic Profiles Not Cutting It

    To start I apologize if I'm in the wrong section. I've had a Vj1204 for quite some time now, I still use Flexi 10 and am using pre-made profiles. My most recent job has a ton of gradients from black to white. Obviously black to white gradients use all levels of grey. in the darker section of...
  2. Question VJ1204 pump issue?

    Hello. Having a little issue. Changed the maintenance station 2 weeks ago ( second one in 6 years, not bad ), printer worked great for the 2 weeks. Yesterday, went to print and barely had color down on media. So no problem I thought, seen it before... took the capping off, cleaned all the tubes...
  3. Black Nozzle Dropout

    My black nozzles keep fluctuating wildly between cleanings. Printer has new dampers and o rings, new cap top on the maintenance station also new print head, cables and maintenance station within the last few months. I can't seem to figure out what is causing this. There is ink flowing through...
  4. Need Help HELP E074 err Current Cr and Bands

    hello my friends i know this is an old thread, but i have the same problem with my vj 1204, check the image, i buy a new print head whit a flat cables new and one kit of maintenance, i try print but E074 err Current Cr and the carriage stop in the middle of the printer, and later of reset the...
  5. Dx5 Manifold

    Looking for purchase of a manifold for my DX5 print head. I need the part asap and am looking for a US vendor. International may take too long to arrive. Mutoh VJ1204
  6. Mutoh VJ 1204

    I have a VJ 1204 that we couldn't get ink to hold - after (3) weeks messing around. Great parts machine or if someone else wants it. I have since purchased a VJ 1324. If interested - contact info at signsofparadise.com or email eamidon248@aol.com
  7. Pinch Rollers for VJ1204

    All: I am looking for a good vendor to replace my pinch rollers. I really do not want to pay 26.00/each for these when I know some company is making them for pennys. I welcome all suggestions.
  8. Mutoh VJ1204 screeching noise when rolling media fast

    Ok, this started years ago on and off. It was sporadic but now as of today it's constant. When the material runs on the higher speed, something inside SCREAMS, sounds like metal on metal screeching. At printing speeds there are no noises. What should I check for first? Any suggestions, ideas or...
  9. Mutoh VJ1204 missing black nozzles only

    We have a Mutoh VJ1204, we are running OEM inks except for the black which is a 440ml after market cartridge. We have been running it for around a year without issue, until now! It started to band on the black, so I did some head soaks, and the usual routine. It recovered them mostly, but we...
  10. Double Strike on Mutoh VJ1204

    Working on translucent prints... is "passes" the same thing as "double strike"? Wanting to ensure proper display of colors. :thankyou:
  11. Mutoh vj1204 not printing magenta

    Print was running, magenta ran out- said to change & we did. Print started again, and entire color output was changed. Did some head cleaning & charges... magenta still not showing. Soaking head currently. Noticed air pocket in magenta line... Mutoh site says you can pull ink through the...
Top