• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

wasatch

  1. Help with settings for Graphtec FC7000 -130... Please

    Does anyone have a 7000 series cutter running with Wasatch and willing to help me check some settings? I've been posting a couple issues lately but I still need just a little help. I replaced the Y motor and the plotter will cut fine in GPGL mode using Cutting Master 2 and CorelX6 (vinyl only)...
  2. Graphtec 7000-130 help please

    I thought I had my Y position error fixed, after cleaning rails etc. it worked great for a little over a week but long story short I ended up replacing my Y motor. The Y position error is gone and the plotter initializes normally, senses the media length and width just fine and will do the cut...
  3. JV33-160 Photo Paper Profile Help-Wasatch RIP

    I have recently ordered a new paper for printing photos and art. Can anyone help me find a suitable profile? We run Wasatch for RIP. The paper is Satin Solvent PE 225 gsm. I have attached the spec sheet. Any help is greatly appreciated!
  4. Wasatch softrip 7.2

    Hi, can anyone help, I've broke my v7.2 application disc. Has anyone got a link to download this please. Thank you
  5. new mutoh 1624x banding

    We just bought a new Mutoh 1624x. We have had a previous Mutoh 1604 for 7 years, so we are familiar. We just had it set up by the installer and he installed Flexi that came with the purchase. We had previously used Wasatch ( a newer version on the 1604 ) Wasatch told us that it was not...
  6. RIP for sc545ex

    Hey. I just revived a sc545 while i got from a guy that said it was completely dead, just neede a main board and heads. Well i replaced them and the machine is firing great how ever the copy of versaworks which i i got from him open and verifies the the printer but the status says 'not...
  7. Corel users..EPS Export?

    Hi everyone, Here's a new thing that never happened before... I have to convert all my text to curves before the contour cut line will show up in Wasatch. Usually I can just take the fill out of text, apply the contour cut and export as an EPS. When I export I have the box checked to "Text to...
  8. Wasatch 7.0 Grainy/Speckle print issues

    Hi guys For the past few years, we have been running Mimaki JV4-160 printers using PhotoPrint Server 4 RIP software and CorelDraw to design. We've recently decided to upgrade our RIP software to Wasatch 7.0, but ever since the upgrade, all our prints have a grainy effect on them. We believe...
  9. Frustrated Corel contour to RIP question

    I have Corel X6 but just couldn't get my contour cut path to work in my RIP so I went back to X5 because I have no problem cutting from there. I have checked every setting in X6 and compared to X5 to be sure they're the same. I have checked my preferences in my RIP, I have followed the 2...
  10. Wasatch EPS cut path

    Well this is a new issue for me. I usually use PDF files with a cut path in Wasatch (I run Wasatch 6.3) and have no problems. I sent a small print file as an EPS with a cut path, printed it and it never put the file in the cut queue. I sent the same file as a PDF with the exact cut path and in...
  11. Wasatch softrip and icc profile

    Hello, I have an epson 9800 and use wasatch 6 as rip. I'm a traditional artist switching some years ago to digital. Was always satisfied with printing with standard driver settings within photoshop, but decided to set up a workflow with colormanagement. I'm making Icc profiles with colormunki...
  12. Accidently deleted a cut file in Wasatch

    :Oops: I thought I had all my decals cut in a large order I'm doing and it turns out I was wrong. I'm running Wasatch 6.3 and was wondering if there is a way to send only the cut portion of a print/cut file so I don't have to reprint the entire batch of decals again. Thanks in advance.
  13. Profile to use for Perf (Roland SC540, Wasatch RIP)

    Not happy at all with the results I'm getting. My normal everyday use profile, SAT up 30, Overprint 2. Thanks
  14. Potential Windows 7 compatibility issue

    I have been using Windows XP to run Wasatch SoftRip 6.7 with my Mutoh 1614 64" printer but have recently upgraded computers to one Windows 7. All drivers have been installed, printer pinged, etc. Called Wasatch and Fellers tech support and spent hours on the phone with these guys (all are quite...
  15. Help choosing next RIP -- Wasatch or Onyx??

    I have to make a decision by the end of this week as to what RIP software we will be running our new HP L25500 on when we move to a new location. We already have a Roland XC-540 Print/Cut and I've only been using Versaworks to this point. I have done a lot of reading on these forums and...
  16. strange behavior

    Has anyone ever sent a file to be contour cut by a your graphtec and instead of reading the registration marks it just cuts a several small digits and quits? I have a new fc8000 that I have been struggling with to do contour cuts. I print with Mutoh 1304 and RIP with Wasatch. After struggling...
  17. Caveat Emptor: (Thinking of buy Wasatch Softrip?)

    Caveat Emptor: (Thinking of buying Wasatch Softrip?) After trying unsuccessfully a number of times to speak to Tech support at Wasatch. I sent the following email to all the addresses on the Wasatch website hoping to find a customer service minded individual. “My computer crashed and I...
  18. signlab 8 value

    I have a 1304 mutoh and a mutoh sc1400d cutter. I design in Adobe but have been using Signlab 8 to rip, print, and cut. I do not design with Signlab 8 nor do I have a desire to do so. I would like to switch to just a nice rip, print and cut software like Wasatch. I have read many of the threads...
Top