wiper

I am trying to essentially find an exploded view of the wiper/felt assembly on the LEC2-640. We had an issue where the wiper blade was stuck in the wiping position, and it was between the UV lamp and print head housing. In order to get it "unstuck" it had to be physically pushed down because...

Hi All, Anyone knows if you have to use 2 Felt Wipers and 2 wipers on Roland XR-640 ? I've bought used XR-640, currently having 1 felt wiper and 1 wiper set up and 2 empty slots for additional felt wiper and wiper. Is it supposed to be this way or I should be running it on 2 felts wipers + 2...

Hey guys, Our shop has a Roland SG-540. The last few months we have been having some really terrible stipes across our prints(please see photo of the worst instance). We know very little on the maintenance and of the machine. We have found the only way to combat this issue is to do a manual...

Have just R&R'd 3 pump motors and have a 4th ready to install for the wiper scraper. However, it is mid way into the chassis, and from observation, not easily accessible. It appears I may have to remove other components to get to it, just not sure on where to start and how difficult this is to...

Hey everyone, The wiper on my UJF-3042 appears to be getting jammed under the metal rail as seen in the image below. It has been a regularity since its first occurrence, normally happening when doing a regular/hard cleaning. I was curious if anyone else has experienced anything similar and...

Can anyone tell wht the V shaped wiper holder (and felt too) has to places for wiper but only one is used? I mean why the second place is empty (this applies for felt holder too)

I have a customer that wants to put her logo and text on her mini van's rear window. (Die Cut) I asked how often she used the rear wiper. "usually just one swipe to get the rain or snow off". Has anyone had experience with this? What life expectancy should she expect? Will it start...