“position invalid, out of range”.

[Karen-Kang]

Hello , my printer is roland vs540 printer
after replacing the new scan motor, the error message is position invalid, out of range

anyone can help?

 

[techsign33]

It's look that the carriage can't detect where it's , there a limit sensor on the far rignt side of the printer the carriage detect it when power on go to right detect then back to the left parking above the cap you need to do limit intialization here is video link

[video=youtube;uEYS7A6fpbU]http://www.youtube.com/watch?v=uEYS7A6fpbU[/video]

and PDF document ,mybe not work from first time repeat it.

If it's not work mybe the limit sensor not work you can test it from service menu under sensor check .