• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Need Help 1324x which damper correspond to which nozzle check?

K

Keevan

New Member
Ok so you guys familiar with the nozzle check pattern and the damper configuration. See attached image.

Which damper corresponds to which printed pattern on the nozzle check?
 

Attachments

  • Artboard 1@2x-100.jpg
    Artboard 1@2x-100.jpg
    72.9 KB · Views: 240
K

Keevan

New Member
I found it, here it is. Now you know when nozzle check bad which damper to check.
 

Attachments

  • mutoh 1324x ink order.JPG
    mutoh 1324x ink order.JPG
    91.1 KB · Views: 205
U

Umca

New Member
Mistake on the picture. It describes "Top of printhead" But alignment correct for top of dampers. For printhead correct will be opposite top and bottom row. Because the damper has a cross way for ink channel.
 
K

Keevan

New Member
You are right! but for the purpose of the nozzle check and identifying which damper at fault it is accurate as indicated. I had a bad nozzle test on H as shown in the nozzle check. When I changed the F/H damper the problem was resolved.
 
You must log in or register to reply here.
Top