• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

1324XS Help

D

David16

New Member
I Purchased a used VJ1324XS I can not get any ink to flow I have cleaned and cleaned I just replaced the maintenance station, new ink and still nothing Im not sure how long it sit before I got it was told 3 weeks
is there any thing more I can do before I have to try new nozzles
Thanks for any help
 
R

rrd

New Member
3 weeks is nothing. It should flow just fine if that's all it was. Put some cleaning solution in the cap and let the head sit there for a few hours. Then take 2 syringes and plug them into the waste hoses. Clamp one hose with forceps. Then push the head and hold as far right so the cap is tight. Pull ink with the one syringe that is not clamped. Ink should flow. Once you have ink clamp that line and unclamp the other line and pull ink with that syringe. Once you have flow in both lines do a couple of ink charges and maybe a couple long cleaning cycles. Hope this helps.
 
You must log in or register to reply here.
Top