Question after cleaning head and changing damper of cjv30-160 won't print at all

[nadir123]

after changing damper and flushing the head .the printer with no message of error .i have done INK FILL UP and run several test print .still no INK coming out ???

 

[MelloImagingTechnologies]

If you moved the head cable plug or wet it - probably a blown fuse or board for printhead

 

[Customise]

Can you see if the ink has been pulling through into the captop? Did you change them all or just one?

 

[nadir123]

after cleaning my captop manualy she start print with some white lines i think she need to print more.thank you

 

[MikePro]

unfamiliar with cjv30's ink system, but it sounds like you're not getting enough ink flow. Even if the printhead is firing again after your cleaning, the white lines lead me to believe it is still "gasping" for ink supply. Posting a link to an old thread that includes steps to verify ink flow, could be worth a shot. at the very least, its most likely not an electrical or a printhead issue.