Selling my Gerber GS-15 Vinyl Cutter Plotter. This is a Tangential plotter- uses solid knife blade.
1,300.00 and 180.00 for shipping ( 120.00 case deposit).
NEW DRUM, AND NEW VINYL HOLD DOWN BAR.
Note: crack in corner of front cover.
See TEST Cut vinyl sample.
Can be used for Vinyl, sandblast, and popular with Monument and Sandblast Manufacturers.
Machine works well. Drum is NEW. Replaced March 2017. Rubber Roller in front of Drum replaced Feb. 2017.
Accessories Include:
1. Roll Holder
2. Original Data Cord - ( has slight exposure of wires at connector, but still works well).
3. Knife Holder with Blade.
4. Power Cord.
I used this unit with Gerber Omega Software. ( have not tested with Flexi, etc.).
No Software Included. Will Ship UPS Ground- Signature Confirmation required. Lower 48 States Only.
Shipping Includes 120.00 Hard Case Deposit, and Return UPS Label
1,300.00 and 180.00 for shipping ( 120.00 case deposit).
NEW DRUM, AND NEW VINYL HOLD DOWN BAR.
Note: crack in corner of front cover.
See TEST Cut vinyl sample.
Can be used for Vinyl, sandblast, and popular with Monument and Sandblast Manufacturers.
Machine works well. Drum is NEW. Replaced March 2017. Rubber Roller in front of Drum replaced Feb. 2017.
Accessories Include:
1. Roll Holder
2. Original Data Cord - ( has slight exposure of wires at connector, but still works well).
3. Knife Holder with Blade.
4. Power Cord.
I used this unit with Gerber Omega Software. ( have not tested with Flexi, etc.).
No Software Included. Will Ship UPS Ground- Signature Confirmation required. Lower 48 States Only.
Shipping Includes 120.00 Hard Case Deposit, and Return UPS Label
Attachments
Last edited: