Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Graphtec registration marks

Discussion in 'Tips & Tricks' started by SlightlyChilled, Oct 24, 2012.

  1. SlightlyChilled

    SlightlyChilled Very Active Member

    1,270
    0
    36
    Dec 19, 2009
    Hell
    OKay so I have a OLD falcon 48" that has clogged black but all other colors are fine.
    So printing registration is like no go they are real faint. So here is my trick make 1mmx20mm black strips and if you can see where they were printing just lay cut strips in the center of the marks(covering the faint marks) and you shouled be good to go. They not be 100% but it's 99% there.
     
    Tags:
  2. WI

    WI Member

    182
    0
    0
    Nov 7, 2012
    Did you try going over the reg marks with a sharpie? Pretty serious kludge, but it works.
     
  3. MikeD

    MikeD Active Member

    594
    0
    0
    Oct 25, 2011
    fine point sharpie works
     
  4. SlightlyChilled

    SlightlyChilled Very Active Member

    1,270
    0
    36
    Dec 19, 2009
    Hell
    no love with the sharpie. I would do that when my roland24 would act up
     
Loading...

Share This Page

 


Loading...