Suggestions i changed the head on my valuejet 1614 and now it wont print dont know where to go from here?

[NickAutoGear]

i don't know what other steps to take or what other thinks to try once i changed the head i don't think the ink is flowing through and i noticed air in the lines do i have to bleed lines?

 

[letterman7]

Yes, you have to draw the ink through the lines somehow to fill the dampers. Most people use a syringe on the line right at the damper until the ink gets there, then drawing from the drain line, creating that suction on the maintenance station.

 

[Joe House]

You should be able to do a couple of little charges from the menu (cleaning menu I think) to bring the ink up to the head.