Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ink seep

Discussion in 'Mimaki' started by mustafade, Nov 16, 2012.

  1. mustafade

    mustafade Member

    202
    0
    0
    Aug 13, 2010
    Hello All,

    I noticed on my JV33 accumulation of ink under the capping station and i pulled out the clean it and noticed that it started seeping down under where the absorbent pad is.

    I think it is seeping left of the cap top and than down below.

    My question is, did anyone experience the same problem with their printer and how you guys resolved the issue?

    Thanks bunches,
     
    Tags:
  2. ironchef

    ironchef Very Active Member

    1,293
    17
    38
    May 1, 2012
    Miami, FL
    Pictures please
     
  3. mustafade

    mustafade Member

    202
    0
    0
    Aug 13, 2010
    I already cleaned the whole mess.

    Just to give you a mental picture of it;

    There is a plastic contraption, cap top moves right to left as the printhead prints which is spring loaded which makes it move back in position(left) (you can move the cap top towards right when printer is in maintenance mode) in black and it is secure with two screws to the frame. Inside of this black contraption where the ink accumulate and than finally it seeps in to the machine.

    I hope it make sense.

    Thanks
     
Loading...

Share This Page

 


Loading...