3Dsigns
New Member
Has anyone ever used this brand on raw HDU? https://ublaststencil.com/product/623/
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Sandblast Stencil
- Thread starter 3Dsigns
- Start date
3Dsigns
New Member
The webpage doesn't seem to list a thickness. https://ublaststencil.com/
For years I have used Anchor [HASHTAG]#153[/HASHTAG] for pre-paints and [HASHTAG]#155[/HASHTAG] for raw substrates. I also tried Hartco 930 and 425 while Anchor's factory was down for awhile and I couldn't get it (Hartco is JUNK) I think the Anchor is 35 or 32 mil. This "U-Blast" stuff is quite a bit thicker and is used in the monument industry, but it appears to be less than half the price of Anchor.
For years I have used Anchor [HASHTAG]#153[/HASHTAG] for pre-paints and [HASHTAG]#155[/HASHTAG] for raw substrates. I also tried Hartco 930 and 425 while Anchor's factory was down for awhile and I couldn't get it (Hartco is JUNK) I think the Anchor is 35 or 32 mil. This "U-Blast" stuff is quite a bit thicker and is used in the monument industry, but it appears to be less than half the price of Anchor.
Last edited: