Wanted VG-540 PARTING OUT ANYONE?

[signsmtihsigns]

Looking for a couple of small parts for the original VG-540 TrueVIS. The plastic hinge for the R cover and the STAY plate (blue) for the middle cover Left side.
Hope that makes sense..

 

[Roland Certified Tech]

Can you identify which numbers you need from this drawing. These parts are available. Also, please provide the serial number to make sure we’re looking at the same printer. these are for an original VG, not A or I.

 

[signsmtihsigns]

Thanks for getting back to me. I have this parts catalogue myself. The hinge is #51 but I have a hard time identifying the other part which it looks like #12 Stay Cover. It is the cover with the white wheel attached.
Ser. # LDB0212.
Thanks again

 

[Roland Certified Tech]

#12 is the metal piece that houses the sensor for the front cover. Left side only.
Is that what you need?

 

[signsmtihsigns]

 

[signsmtihsigns]

the blue piece it snapped off

 

[Roland Certified Tech]

I believe that the actual Blue piece that your thumb is on is welded to the actual cover. I have a picture attached but will need to look at an actual printer to be certain.
You can remove the spring mechanism and just use the cover without that if it if that’s what you trying to fix. They have done away with that spring on previous and future models.