When printing a large, solid-color block in an attempt to recover missing jets, what is the best wave pattern (if any) and dpi (540X720, 720X720, 1440X1440) to use? And, should you use CMYK and "no color correction" so that only that color ink is printing? I have a 1204. And, has this method ever worked for you? Thanks.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
What is best wave pattern and dpi to use to recover non-firing jets?
- Thread starter RG
- Start date
floater302
New Member
how many nozzles are not firing?
premiercolour
Merchant Member
I would put in four cleaning cartridges and initiate a head clean. It dumps all the inks, empty the ink lines, flush with cleaning solution and prime with new ink. Dampers, wipers, maintenance station are recommended to change. We suggest the customer to do it every couple years.
Compatible Eco Solvent Ink for Mimaki JV3, Mimaki SS2, Best Aftermarket Ink, Cheap Mimaki Ink
Compatible Eco Solvent Ink for Mimaki JV3, Mimaki SS2, Best Aftermarket Ink, Cheap Mimaki Ink