-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
PrinterMike's latest activity
-
PrinterMike replied to the thread Bad Profile Curve.Ron - Good thought on the roller slip. We can print both directions or Unidirectional. The band is wider in bi-directional. When... -
PrinterMike replied to the thread Bad Profile Curve.I think the rollers are OK - below is a picture of them. They are hard - I thought they would be rubbery. From the looks of the...
-
-
PrinterMike replied to the thread Bad Profile Curve.This morning I did the 500mm media adjust after adjusting the pressure to medium and we still get a light banding (not as bad as in the...
-
PrinterMike replied to the thread Bad Profile Curve.Thanks for the replies. I have calibrated the media advance - how much pressure should be between the rollers and the media? I can...
-
PrinterMike replied to the thread Bad Profile Curve.ColorCal - I'm don't understand your suggestion. Are you saying I need to check the values of the ink limit test with my densitometer...
-
-
PrinterMike replied to the thread Bad Profile Curve.Pauly - all nozzles are firing Colorcal - I tried a low ink limit of 50% and one at 85% - similar curve in both profiles. FrankW - the...
-
-
Our Epson 60600 has been banding so I tried making a new profile (which didn't fix the problem). I made the profile in Flexi Production...
-
