I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Options- studs or tape and silicone/adhesive. Client will end up with repairing holes in drywall from 3/16 studs or repair damage left behind by VHB tape when removed. I have seen masking tape and frog tape pull paint off of drywall when removing the mounting pattern so any method capable of...
Looking for corrugated kraft suitable to route for dimensional letters. I guess standard corrugated cardboard could be used but I have seen some other materials at trade shows. Does anyone have a recommendation? example attached.
Thanks.
Is Fellers an option for you?
https://www.fellers.com/fellers-shopping/cat/banner-material/sub/non-curling-synthetic-banner/set/pop-up-10-mil-semi-gloss-non-curling-banner-material
Why not just paint the wall if they just want a solid color? Most printers (that I have worked with) are going to struggle to print a consistent solid dark color and have it match perfectly panel after panel.
We also installed a UV flatbed from Fluid Color. The R84F Turbo - 4x8 with Ricoh Gen 6 heads and linear drive on the x axis. We are in Louisville, so very close to their headquarters just outside of Cincinnati. Information and support before we bought the printer was great, delivery...
We used the raster method before the DCS printer. A Xenetech rotary engraver drilled the holes for the beads and raster beads were inserted by hand with the braille pen. Raised pictograms and text were laser cut from 1/32" Rowmark and applied by hand. With the DCS we print all of the braille and...
We have a DCS 7200. Clear braille when printed normally has a slight amber color discoloration, it is clear-ish, but not crystal clear. This clears to nearly crystal clear after about 2 days. I did not believe it either until I saw it for myself. On our machine there are two clear channels, one...
Once upon a time at our shop we had a square piece of ~1/32" thick clear rowmark - ish type material and it had indexed holes so that when marking holes in corners 1/2" - 3/4" - 1" - 1.25" ..... All one had to do was align the edges of this template to the edges of the material and mark the...
Eco-Sol Roland for 4.5 years, added an HP 360 Latex. Now we print 95% Latex / 5% Eco Sol. Colors are so much better. Still need Roland for contour cutting and white ink situations. Latex requires (2) 220 circuits - 16A per circuit - double check that. We have been running Latex in late fall and...
We will be selling a used Oce/Fuji Acuity Advance (Oce Arizona 350) - Mfd. date 12/2008. Need help with pricing ideas - how much - where to list?
48" x 96" vacuum table with roll to roll - CMYK with white ink - Model # HYB172. RIP workstation / Production Server 5 and operator console.
Thanks...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.