Search results

I'm having issues with the cutter portion of my Roland XC 540. The cut carriage follows the path of the contour cut line, but the blade won't drop to contour cut. Is it simply a setting? How do I test the magnet coil of the cutter? What am I missing? Suggestions?

Just wanted to thank and update everybody on the issue here. After some extensive bench testing, I had discovered that one of my C4131 resistors on the C heads section of my Head Board was bad. I soldered a new one into place, installed a new 3.14 A fuse, then did a test print. Bingo, we have...

How and why would all of a sudden I have a couple of cables crossed?

I am once again requiring your knowledge VanderJ. After inspecting the 36 pin cables, I changed the blown fuse and it immediately blew again. I have since replaced all 6 of the 36 pin cables and installed a new fuse again. It also immediately blew again. Any thoughts as to why it would do that?

After a quick continuity check, I can confirm that you are absolutely correct. Fortunately enough though, I seem to have fuse holder blocks in which the blown fuse can simply be popped out and the new fuse popped back in. I've also closely examined the cables and can see no damage anywhere, or...

I need some help here please, before I go insane. I've purchased a Roland XC 540 about a year ago. I've put some money into it to get it up and running and into production. I've installed new heads, new capping station, new dampers, new ink pumps, pretty much every consumable that I could...