• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Mimaki CG-100SRiii / FineCut Issue

    You should use a hi speed USB cable 2.0 for this case to avoid those errors. Also check if the plotter chosen is correct from the set-up and check if the machine is in correct command.

  3. Mimaki JV300-160 error (bought used machine)

    Replace the printhead 2 and the machine will be fine. Try soaking head1 to unblock the nozzles.
  4.

    Need Help Mimaki CJV 150-75 Misfiring issues , Cyan mark most visible on Pinch roll lane

    First try doing reverse burge on cyan channel and check

  5. JV33 ink profile in CJV30

    You can choose the profiles depending on the ink type your machine is using and its rip software.
  6.

    Need Help Mutoh426VJ Problem! Overprinting Cyan over colors (Allways)

    Check the captop condition first before thinking of replacing the printhead

  7. Need Help Roland VG-640 cutting issues

    Check the condition of pinch rollers while plotting check if the media is sliding. Also check the offset position setting on the machine.

  8. Mimaki jv150 take up reel is moaning

    Open the take up motor and check the gears if they are fixed properly or loose.
  9.

    Need Help Y Belt problem in Mimaki CJV150-160

    Please open the left cover of the machine and loosen the two screws of the belt and adjust the belt tension and it should lie in the middle of the pulley horizontally then check.
Top