Search results

Ron - Good thought on the roller slip. We can print both directions or Unidirectional. The band is wider in bi-directional. When printing unidirectional it prints a pass, returns the head, advances the paper and prints a pass (I think). I'll look at the head when I get back to the shop...

I think the rollers are OK - below is a picture of them. They are hard - I thought they would be rubbery. From the looks of the material - it is meant to be a hard roller. What else could be causing the banding issues? I haven't seen a response yet on the proper way to set the pressure of...

This morning I did the 500mm media adjust after adjusting the pressure to medium and we still get a light banding (not as bad as in the photo above) on vinyl. We did notice a slight roller impression on the vinyl at this setting (and did at the low setting too - though not as much as medium)...

Thanks for the replies. I have calibrated the media advance - how much pressure should be between the rollers and the media? I can move the rollers somewhat easily.

ColorCal - I'm don't understand your suggestion. Are you saying I need to check the values of the ink limit test with my densitometer? How would that translate into Flexi's ink limit wizard?

Here is a picture of the banding.

Pauly - all nozzles are firing Colorcal - I tried a low ink limit of 50% and one at 85% - similar curve in both profiles. FrankW - the cyan channel in the linearisation tab looks good. Below is a screen shot of all channels on deltaE and output. I did not try shaking both cyan cartridges -...

Our Epson 60600 has been banding so I tried making a new profile (which didn't fix the problem). I made the profile in Flexi Production Manager 21. In the final tab of the Color Pofiler it shows the cmyk curves. The myk curves look like typical curves, the cyan channel looks similiar up to...