encoder

I'm a newbie to this machine and had it working for a short while. Recently, when turning on the machine I got the above error. I also have an illuminated Red LED for AMP FAULT. All the green LEDs are lit apart from SPIN #2 My background is in embedded systems (mix of electronics and software)...

Hp latex 315 printer "SE Code: 45:03 – Rewinder servo shutdown" error. I have some technical experience in the electrical/electronics troubleshooting, thank God. I watched it throw this hard stop code several times on startup with this "input feed roller/rewinder" motor trying to rotate forward...

Today my new encoder strip arrived and it is not for an SP-300 but an SP-540 Question can I simply cut it down to the correct size and then make a hole in it with a drill bit or do I need to send it back? Thanks Jim

I need to find a Roland Dealer that stocks an encoder strip for an SP-300 and I have already tried Florida Graphics in Clearwater but they did not have one in stock. I also tried using Roland USA to locate another dealer here in Florida but it appears there are not many dealers left. I do not...

I have cleaned my encoder strip many times but never installed a New encoder strip so I have a number of questions. 1. Does the printer have to be in Service mode first? 2. Is there a spring tension that needs to be set? 3. I do have the Service Manuel for my SP-300 but I did find much...

I did a rail lubrication like normal and then the carriage moved back and forth to spread the lubricant. When it got to the left side it made a loud noise and gave the 86:01 Substrate Jam warning. There was no substrate in the printer. I did get a spot of oil on the encoder strip while...

Pretty sure we need the dampeners, encoder strip and both heads replaced in SP300v . I know prices vary, just trying to find out rough pricing. Techs are less then 10 miles away. Your help is greatly appreciated! Thank you.

Multiple issues happening at the same time, including overspray in the cyan, but the one I really need to tackle is the head carriage gradually moving further and further to the left. Printing in unidirectional, 360x540, 6-pass and 720x1440 16-pass Can't reproduce issue with data cable swap...

Hi guys first post have a tiny tiny bit of overspray on black head. cant work out if it's encoder or static. changed encoder strip about a month ago due to poor printing and it cleaned it up a lot. have a spare sensor I want to put in but can't find instructions on replacing it have the user and...

Hey all, just wondering if anyone knows of a generic encoder strip for mimaki printers, I'm talking about the clear piece of plastic, not the sensor, I'm being told mimaki wants $100-$200 for these which seems ridiculous for a piece of plastic, thanks for your help! - Josh