• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

benski's latest activity

  • benski replied to the thread Film removal difficult.
    Makes sense. I'm still trying to figure all this out. I started at 220 F and now I'm at 265 F temp. At times it comes out evenly melted...
  • benski replied to the thread Film removal difficult.
    turns out we just need to make sure it's completely cool to peel.
  • benski reacted to ComWraps's post in the thread Film removal difficult with Agree Agree.
    Wash the shirt(s) in a detergent that does not contain any fabric softeners. Add oxy-clean to the wash, in order to pull out any...
  • benski replied to the thread Film removal difficult.
    Alright. Most likely will have to check the powder then. With a complete cool we are able to remove and finish the work. With our third...
  • benski posted the thread Film removal difficult in DTF (Direct To Film).
    I did my first Dtf print and press. I've done alot of DTF presses and it has been pretty easy going. With third party films. Mine are...
  • benski replied to the thread Will not print my white channels.
    company is called Topuv. They were helping. But most videos including them just said to create W1,2,3,4 channels for the white. I didn't...
  • benski replied to the thread Will not print my white channels.
    Upper case W in W1 is my answer. The little details. Came across a new video where buddy says it.
  • benski replied to the thread Will not print my white channels.
    What am I missing! I’m comparing the 2 files and I cannot spot any difference. W1-W4 are the last 4 spot channels. I have found several...
  • benski posted the thread Will not print my white channels in DTF (Direct To Film).
    Im very new and only had my printer for a week. I’ve spent the entire week trying to get it to print the white on top or last layer. No...
  •
    benski replied to the thread Pressing issue.
    Im using kraft paper. All my presses are on a 40 by 30 inch press. Is it possible to find parchemtn paper of that size?
  •
    benski replied to the thread Pressing issue.
    hi it is a clamshell. Ive pressed the same way for 10+ years with no issue. Changed the press to a manual with no breathing holes on the...
  •
    benski replied to the thread Pressing issue.
    Ive changed my press only. been pressing this way for 10+ years. My press drawer or platform does not have holes at the bottom. As if...
  •
    benski replied to the thread Pressing issue.
    Well I use tacky paper with adhesive to prevent ghosting. Nothing has changed on my end except the press. My pneaumatic press the base...
  •
    benski replied to the thread Pressing issue.
    thanks Ill check it out.
  •
    benski replied to the thread Pressing issue.
    HI well 200 C is close to 400F
Show older items
Top