• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Bill Modzel

  1. Does anyone out there do silkscreen wall text?

    I used to have a screen print shop before there was cutter printed vinyl. At this point in time I see no advantage in it. Use floor and wall vinyl.
  2. Font help

    Maybe Garamond except for the left side of the T. Some embroidery machines have their own set of fonts also.
  3. Is Gerber stll solidly in the Sign Business?

    I'm in northwestern MI and retired. I have an Edge 2 and a Gsx plotter plus over 50 foils that I'd love to find a home for. I was just going to make a hobby out of it using Craig's List but it just wasn't coming together.
  4. Edge print from '05

    Are you at all interested yet? I'll let things go cheap enough to make it worth it. Edge II, GsX plotter, over 60 color foils plus many duplicates. I had hoped to continue a small home based business but have had some health issues which have stifled me. Wife is after me to clean out the basement.
  5. Edge print from '05

    I'm not sure what you are saying. I'm too far away or you would like to drive over and see it all in operation?
  6. Edge print from '05

    You can contact me at modzel@sbcglobal.net. If you're interested, I have a screen capture of a local map.
  7. Edge print from '05

    I'm in Traverse City, MI.
  8. Edge print from '05

    I'm retired but still have an Edge II and a GsX plotter in my basement. I had planned to just get smaller jobs off Craig's List or whatever to generate some play money. I'm running everything through MacImprint on my old Mac G4 laptop. I was a beta tester for GSP when they were developing it as...
  9. Illustrator vs. Gimp

    I'm stilll running MacImprint on an old G4 laptop. I was a beta tester for it back in the 80's. Much easier and intuitive than Omega ever was. Retired now but still doing the occasional job off Craig's List.
  10. Can I use a plotter other than Gerber to cut my Edge prints?

    You might check out The Plotter Doctor. He repairs them and I think that he also sells used ones. https://www.theplotterdoctor.com
  11. Can you contour cut perf?

    I've contour cut perf successfully but once installed I've sealed the edge with a 3/8" strip of high performance clear. It greatly reduces the tendency to lift, especially on vehicle windows.
  12. Need Help Foil Cracking

    You might try advancing the foil a couple of feet before printing. Sometimes uneven stress seems to build up and that helps.
  13. Question Favorite Font

    Papyrus and Optima
  14. Teflon cutting strips for Graphtec

    I once bought a whole roll of teflon tape very inexpensive.. Lasted me years. Do a search for it on line.
  15. Question copper metalic foil

    I've printed a transparent red/brownish tint and over laminated it on whatever imitation gold pattern vinyl or poly that you have with good results.
Top