• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Billct2's latest activity

  • Billct2 posted the thread Etch Vinyl in Product and Supplier Referrals.
    I have a client looking for some cut etch vinyl for interior glass. One about 35"x30", the other a little smaller. Each would have a...
  •
    Billct2 replied to the thread How to Approach Window Film Installation.
    Scaffold Planks between ladders or some type of support. On the concrete on the right and you’ll probably have to move some rocks on...
  •
    Billct2 replied to the thread How to deal with this.
    Wrap the whole door. But that means removing the lettering that was just installed
  •
    Billct2 reacted to Gino's post in the thread How to deal with this with Agree Agree.
    Why is there a shadow to the lower right of all the white letters ??
  • Billct2 reacted to John Miller's post in the thread Installing acrylic letters with Agree Agree.
    Tell your client that you’ll need to a very aggressive adhesive to hold a letter as heavy as those so he won’t have holes in his wall...
  •
    Billct2 reacted to signbrad's post in the thread ACM Sign Warping with Agree Agree.
    Norma, Thank you for posting this picture. We need to see more pictures of ACM failures, because we are using the hell out of this...
  • Billct2 reacted to ProSignTN's post in the thread Installing acrylic letters with Agree Agree.
    Design your stud pattern so that studs go in mortar joints and not the bricks. Mortar joint holes can be easily repaired and there is...
  • Billct2 replied to the thread Hard Substrate for outside image.
    There are different qualities of MDO. Big box versions are not the same as a quality panel from a sign supplier
  • Billct2 reacted to John Miller's post in the thread Need help replacing neon sign transformer with Agree Agree.
    If the original tyranny says 4.5kv your new 3kv will not have adequate power. There are self adjusting tyrannies that will set...
  • Billct2 replied to the thread Hard Substrate for outside image.
    A cast laminated print on aluminum composite panel would be the obvious choice. But the print will fade after 5 years or so depending on...
  •
    Billct2 replied to the thread How Should I Apply?.
    Then mounting tape sounds like the best option. Though I'd try to convince them to go with vinyl
  •
    Billct2 replied to the thread How Should I Apply?.
    Depending on size they could just be hung in the window with suction cup hooks. Or if heavier fron hooks in the frame. You may want...
  •
    Billct2 replied to the thread Substrate.
    I have done some of that with acrylic but decorated it afterwards. Don't know how it could be done if it's already printed without...
  • Billct2 replied to the thread SignGold vs RealGold.
    I ended up ordering it shipped overnight , job is behind already. It is more gold, SignGold looks brassy next to it. The only thing I...
  • Billct2 posted the thread SignGold vs RealGold in Product and Supplier Referrals.
    I have a job to do that specs Large Engine Turn SignGold but it's out of stock everywhere that I've tried and at least 4 weeks out from...
Show older items
Top