• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by CustomCornholeBoards

  1.

    CJV30-130 Cyan Ink Running Dry

    Final update: The original culprit was our capping station top. The second issue that made everything worse was, the newly installed capping station did not come with the 3rd nipple cap top installed on the bottom, allowing air to escape during ink fills. I have attached a photo of this tiny...

  2. Missing cyan

    I'm having the same problem on a CJV30-130. I've replaced both Cyan dampers, top capping station and started to change the pump, but one of the lines were too short to reach the H connector, so I haven't been able to rule that out. I've done multiple 99 minute soaks. I do not want to jump into...
  3.

    CJV30-130 Cyan Ink Running Dry

    In preparations for hurricane Matthew, I flushed out our CJV30-130 lines, cleaned the head and capping station, thinking we would be without power for possibly weeks. 2 days after flushing the system, I came back into the shop, put in the ink cartridges and filled the system back up. Test prints...

  4. Seeking Mimaki CJV30-130

    We would also take a CJV30-160, however the 130 model is preferred.

  5. CJV30-130 Gold Color Problem

    We're having issues with a slight green tint to some of our prints, heavily when printing Gold colors. It's not noticeable to everyone, but it is becoming more and more of a problem. From what I've read, a method on fixing this is increasing the Magenta usage, but I have not been able to figure...

  6. Seeking Mimaki CJV30-130

    We're located in Orlando, FL and looking to purchase another Mimaki CJV30-130. We can pick it up. PM me if you have one available, southeast United States only.
See more
Top