Recent content by DrumSTW3

I was planning on purchasing a BN20, but stumbled upon a SG2-300, which is coming from a relative. Unfortunately, due to an illness, it was not used much and was eventually unplugged and left to sit for several months. What should I expect in terms of what is needed to get this working properly...

More than likely, it is a problem with the cable. Turn everything off, disconnect the cable, and lay it flat. make sure there arent any crimps in the cable near the contacts. visually inspect for corrosion, or ink on the contacts. reinstall the cables, making sure that there is a space between...

The process is fairly straight forward. Make sure you have the right tools, and everything will go much smoother. When you replace the heads, take the opportunity to replace captops, dampers, and wipers too. Be careful with the dampers when putting them on the nipple on the head plate. Also, the...

That's what I figured, thanks

Need help with this font please.

Can i get the sp300 manual please? DrumSTW3@msn.com

FL Graphics is what I'm trying to avoid. They are 7 hours away. Atlanta is 5 and New Orleans is 3. Im looking for someone closer than FLG, hopefully with a more reasonable trip charge

I need a Roland Tech in or near NWFL, in the Pensacola area. I've been having a hard time finding techs out this way. Also, if anyone has a service manual for an SP-540V and RF-640, could you email it to DrumSTW3@msn.com? Thanks in advance

Does anybody have a service manual for an RF-640 and SP-540V? If someone could email these to me, I would be eternally grateful.