• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Evan Gillette

  1.

    floor stand for rigid panels

    expolinc has some nice ones, not the same though.
  2.

    64Inch Roll-to-Roll Laminator with Rear Cutter

    Looks like I will be ordering one soon ha ha. Im also curious about the flatbed tables.
  3.

    64Inch Roll-to-Roll Laminator with Rear Cutter

    Victor did you buy the mefu one? Which model and what was the experience like getting it to your shop, any hangups with shipping? I looked at the colex version at ISA last year, looked like a decent unit.
  4.

    64Inch Roll-to-Roll Laminator with Rear Cutter

    Do you have a US importer besides colex?
  5.

    Looking for Beta Testers for the CRM/Quoting software I made

    Filled your form, happy to give constructive feedback and suggestions.

  6. Window Perf, Briteline?

    I have had good experience with briteline on both eco solvent and UV, but I don't run any latex machines, the heat is going to be the issue and may cause buckling. I believe they updated their material lately with a different liner, so my experience may be obsolete anyways... Grab sample roll...

  7. Easy way to install floor graphics?

    Floor squeegee works decent or even a stiff bristle broom. Most floor applications have thick film with low stretch.

  8. Need Help Acrylic letters mounted with spacers

    Agreed, if needed you can also run painters tape from the face of each letter up to the wall as temporary support while the silicone sets up but usually not needed as long as your holes arent sloppy.

  9. SpringSign Banner spring system

    What size is the project, what lifespan or changeout frequency? I would look at Ackland or similar before going to a spring system personally.

  10. Alternative for using flatbed cutter

    https://www.iechocutter.com/vk-automatic-intelligent-cutting-system-product/ Sure looks same same to me...

  11. Alternative for using flatbed cutter

    From what I have been looking at the last couple years, a decent xy cutter is more expensive than an entry level flatbed like a summa. Either way you are looking north of 50-60k. If you are feeling adventurous you could probably direct import an xy cutter but good luck if you run into any issues...
  12.

    Question Trimless Channel Letter Fabrication

    If anyone needs an amazing supplier for these letters Brad ^^^^ is THE MAN!

  13. JRS CLOSING

    I have made a few. Feel free to message me with questions/details to see if I could make them.

  14. JRS CLOSING

    ADuke, what company are you with?

  15. JRS CLOSING

    I have made a few this year, You can send me what you are looking for and I can see if it's something I can do. I have some aluminum in stock but have just been using off-the-shelf extrusions so far.
See more
Top