I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Does anyone know where or how I can get the ink chips unlocked preferably in the UK - having trouble with 220ml 3rd party ink carts reading the chips. So am considering other options.
Thanks
The ink carts have not long been replaced all Original Mutoh ink. Yes I see a tiny bit of banding but after I print just over 50cm or so it seems to improve , I have been getting some great results printing black without any banding turning profiles off in onyx and Printing 100k on the fuzz 1...
Thank you will give that a try.
Yes seems to be the same nozzles unfortunately.
It's just over 2 years old from new, its used as a side business so used around once or twice a week. On the occasions i dont have any work I at least run a nozzle check and a light clean once a week.
Thanks Saturn, what's the best way to do that ?I've attached a pic of the pump and what result I got from the nozzle check ( was slightly worse from leaving it over night )
I can unscrew the 2 screws and detach the pump quite easily from the base of the printer but where do I go from there ?
I...
Thank you very much for your help, really appreciated. I have now replaced the cap top and run the solution through the lines I have also run a couple of cleans and run a print 100% k but I'm still getting a few missing black nozzles a very slight improvement but not perfect. Is this something...
Im just about to change the cap top as I have some missing black nozzles and wondering how I go about flushing the pump tubes whilst im changing the cap top.
The waste ink is hard to get the drain started I have been getting a syringe and pulling the ink out of the drain tube to get a flow...
Thanks, just tried the Avery website there isn't any for the VJ628. May be a silly question but could I use a profile built for the VJ1324 for the VJ628? - I presume they are the essentially very similar ?
Thanks
Has anyone got any decent profiles for the VJ628 and Onyx Rip?
Struggling to find a decent one. Im looking for one for monomeric and polymeric gloss vinyl and PVC banner.
Many Thanks
Graham
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.