Recent content by Haimduek

For the L800 At 170% saturation, Ink usage will be 1.74 ml/sqft which translating to Supplies cost $0.17/sqft The Ink coverage at this saturation is 575 sqft/liter

In your case it is diversified displayed products who recently got purchased by Piedmont Plastics. They are authorized to service and located in NJ but covering the entire North East. Call Andy Wolf (973) 945-3853

You can do Styrene 020, 030, 040 etc. w the R series using the right profile which is listed in the latex media locater on the web. You have to decrease the curing temp, Slow down and reduce the air flow. If you need the profile pls contact me.

Yes the FB550 FB500 FB750 FB700 are using a 240 volts 2 phase much like a dryer plug. The computer system is running on 110V

The latex inks are pigments immersed in water so the by product is small amount of water vapor evaporating to the air at the curing stage. It will not smell . On the other hand the media such as banner (not all) when being cured with low heat will emit media odor but that has nothing to do with...

nolanola - you did buy from an approved reseller and the HP service organization should help you as the machine has a year warranty and it looks like you also bought an additional coverage. Let me help you escalate it internally. Pls open a case number by calling Technical Support for North...

Pauly, Our HP latex technology has Gen3 inks and Gen4 ink (The latest). Gen3 inks has a built in into the inks anti scratch additive which automatically migrates to the surface at the time of ink curing and harden to protect against scratches. In Gen 4 we created a separate channel called OC...

No these are general characteristics of Latex , you might call our remote support and get some advice. Also try Caldera and Onyx as RIP and make sure you don't have any additional color tables being imposed by your SAI Rip. You might want to re- RIP the file when you change from 600 to 1200...

Pls into Latex R2R printers they are the highest print quality 1200 DPI completely green, they do not smell like solvent or UV, easy to operate and do not require waiting for Gas out. They can be laminated right away. You can load the printer from the front and the take up reel is on the front...

Latex replaces solvent I am with HP and wanted to shed some light on the question you have posed. As you know latex is replacing solvent and very quickly. By now more than 20,000+ hp latex devices were sold and for the following reasons: No need to gas out: With solvent you have to wait 4 - 8...

Latex is replacing solvent I am with HP and wanted to shed some light on the question you have posed. As you know latex is replacing solvent and very quickly. By now more than 20,000+ hp latex devices were sold and for the following reasons: No need to gas out: With solvent you have to wait 4...