I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
What tool are you using? Do you put transfer paper on top of print before cutting? Are you using registration dots to line up print for cutting? I have seen this before when the vinyl stretches and doesn't line it up correctly.
Congratulations on your new toy! If you need help with tool selection, feeds and speed let me know. You can email me or call at josh@xedgetools.com or 866.591.9991.
If you are cutting more vinyl and material that is more knife focus I would stick with a machine that does knife first and router second. CWT Colex and MultiCam Celero are much faster then a router with a knife like the Apex 1R.
This material should cut pretty easy. We have lots of customers cut this material. I would recommend a 3/16 or 1/4" tool. We offer a coated tool that will last longer. Its a little more expensive but may work better for your application. You can use the single flute Viper XVO2232 run it at...
I know MultiCam sell a felt/belted material and they do special sizes. I'll attach link below. Hope this helps and good luck.
https://www.multicamgl.com/product/felt-mat-underlay/
What is the max RPM of your spindle? We have customers using the XR2062M-CBmm This is a 6mm tool with a 25mm cut length. This tool has 3 flutes low helix which will help with top cut quality. The customers run tool 24,000-36,000 RPM at 200 to 300 IPM. Hope this helps...
Yes this is sad. But if you don't have the attendance, you don't have a show. I was really hoping to meet a lot of you that where going. Hope to see you guys soon.
How thick was the material? Looks like the knife was not cutting it. It looks like the top was being ripped on the shank of the knife and not cutting with the blade. I have routed this and dragged it routed with Razor(XR2062-CB) at 1,800 IPM and with the knife XZ0046(Z46) at 800 IPM depending...
We have a 2 customers that cut this material that I know off. First customer has great vacuum and stack 4 sheets at a time and use our 2 flute compression 3/8" tool XC2023-M. 20,000 RPM at 500 IPM...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.