• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by karentaj

  1. Need Help Error 30 JV3-160s

    I got feedback from an ex-Mimaki tech that suggested I needed to change InfoParam #70 parameter and download the edited .csv file, as the parameter is not accessible through the front panel. I did this, then uploaded the parameters to check that the change was made. It was not. Anyone know if...

  2. Need Help Error 30 JV3-160s

    So I got the option to choose Sol or MSol. (Unsure exactly what these options represent or if there should be other options) If either is choosen 'Set a cartridge XMCYmc' displays. Following your instructions, I restarted at this point, reset parameter 93 back to 0, and restarted again. I seem...

  3. Need Help Error 30 JV3-160s

    VanderJ, Will try that...thanks again. K.

  4. Need Help Error 30 JV3-160s

    VanderJ, I have a question with the instructions you gave. I tried this, and changed the parameter to "0". But what is meant by: "Exit and choose the ink type you want shows on the LCD" Do I press the exit key after changing the parameter? When I do this I simply go back to the previous menu...

  5. Need Help Error 30 JV3-160s

    VanderJ, Thanks...will try this and let you know how it goes.

  6. Need Help Error 30 JV3-160s

    VanderJ, I am trying to repair a JV3-160S originally running F/W 3.1 with bulk inks and a CMYKOG Inkset. There was no parameter backup available. I replaced the motherboard with a used one, and was able to download F/W 3.1 to it. It boots up with CMYKcm inkset, so I know the params are out of...

  7. Need Help Error 30 JV3-160s

    Hey, any luck with this issue? I am having a similar problem.
See more
Top