• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by luehrslogistics

  1. mutoh vj628 unlock the inks

    Any solution on this? I too have a VJ-628 and am trying to disable the smart card check as I've plumbed up a bulk ink system with float valves. Sent an email but never heard back.
  2.

    Master Plotter XY300P Using SignGo Problems....

    I had the XY540P a few years back with the same problem. It's static related. Search google for and you will find some software settings and how to reduce the static and improve the grounding. The silver bullet seems to be setting the curve setting (or something like that?) to medium or low...
  3.

    Banner Jet Walk-Thru + UV Ink Conversion!

    Appreciate the details on your project Biker. Any idea if the included RIP would allow for white and clear on the 2 head version? Also, whats the maximum thickness you can run through the T-Jet? With heat a non-factor there's a lot more you can throw in there as long as you're not stressing the...

  4. New router build CRP4848 4x4 Kit

    Router mount installed. Onto motors and electronics...

  5. New router build CRP4848 4x4 Kit

    I'm hoping the wood base will work out as many of the documented builds on these kits: http://www.cncrouterparts.com/cnc-router-parts-kit-builds-c-23_33.html used a wood base. I should probably read those threads more thoroughly, including their use of the cnc after assembly; maybe people are...

  6. New router build CRP4848 4x4 Kit

    Installing Z axis...

  7. New router build CRP4848 4x4 Kit

    Installing the gantry...

  8. New router build CRP4848 4x4 Kit

    I'm not sure. Before purchasing I asked if it could be done but I haven't seem anybody document an upgrade to a 4x8. Ideally one could just couple the rack and extrusion components (rather than replacing them with longer ones) but I'm not sure if its feasible to have everything line up...

  9. New router build CRP4848 4x4 Kit

    Installing the gantry risers...

  10. New router build CRP4848 4x4 Kit

    My invoice from CNC Router Parts was $3800 which included the router kit, cable track kit, the router mount, all the electronics and shipping. The wood, hardware and paint for the base cost me $200, the Hitachi 2 1/4hp router was $119 from Amazon. I had an old Windows XP pc with a parallel...

  11. New router build CRP4848 4x4 Kit

    X Axis assembly just about done. All squared up and tightened.

  12. New router build CRP4848 4x4 Kit

    Dry fitting some extrusion components...

  13. New router build CRP4848 4x4 Kit

    49" x 97" melamine shelves installed...

  14. New router build CRP4848 4x4 Kit

    A couple coats of Cannonball black...

  15. New router build CRP4848 4x4 Kit

    Table constructed and bondo'ed up to make her pretty.
See more
Top