Recent content by Rallyeguy

"Have you measured the physical prints to quantify the color shift?". No we didn't. It was noticable by eye and the adjustment to bring it back into tune was about 4% magenta pulled out across the board, then as we ran more it drifted out again and we had to pull more out. We believe we...

You'll never see it in pics (phones have color correction built in) its so minor. Its a 4% shift darker in the magenta in a bright yellow color when we re-set the color to match properly. so its a very fine drift, not unlike what might be seen in a neutral gray drift (worst to manage). I'm...

Not the slightest hint of banding at all... The print itself is perfect. We're running it slow (12 pass quality) never thought to run gutters but may try that thank you for the suggestion. It shifts over as little as 15 linear feet of running the prints are 24" tall 36" wide on a 40" roll. our...

I am running a relatively new to us (New machine Installed this last fall) Epson S80600L with bulk ink setup. We have a job with 3 spot colors that need to be on the money. We did our spot color matches and began running the job and have had a mild drift toward a magenta cast. We've tried...