Recent content by SIGN.DIVISION

Here is another example with brown. Band is only in one spot running left to right. Printed a second one for the other side of the sign and there was a band in a different spot, it was a lot less noticeable, because I did a powerful clean. Hopefully someone can give me some ideas. I hate to...

So, this has been going on since 2019 when I bought it. I’m currently on the second replacement head, I’ve clean the encoder strip and disk. I’ve pulled ink through the damper, choke clean, I just replaced the cap top (about every 6 mo). So I’m not sure what’s going on. I just printed a wrap for...

Let me know how replacing the strip and disk works out for you. TIA

I’ve replaced most of my rollers not long ago, so I doubt that’s it. I cleaned the encoder disk and it didn’t help. If I print in high quality / max impact, it doesn’t happen. But I’m not trying to print every job like that. It just takes way too long.. I talked to my tech, but he really wasn’t...

So I just tried to print that black panel in high quality mode and there is absolutely not banding.. WTH? So I guess it’s only doing it in standard mode. Any ideas? I just checked and I replaced my captop (oem) at the end of June. So I just ordered a new one… I can remember if changing makes...

It’s totally random and main only happens when printing black. Sometimes greys and browns. No other colors.

Here’s what the print looks like now. Definitely got worse and there is additional banding running the opposite direction. I’ve never had it run that way. See a few inches below that D. It’s running front to back, along with a thin line at the right side running left to right.

Hey fellas. So I cleaned both the encoder strip and disk. It seems to be worse. Now it looks like it’s running both ways. Ran some heavy cleaning cycles. No luck. Any other ideas

It runs from left to right if your looking at the printer, it’s horizontal

Here is another example. It’s basically on every panel of this wrap I’m printing. It’s done this since I first bought it.

Hey all. I have a VS540 in my shop since 2020. When I’m printing a panel for a wrap, i more than not get a band running all the way across the print. It only happens when printing black and sometimes grey. I’ve cleaned the encoder strip, doesn’t seem to change it. If I run a powerful clean...

Thanks!

Hello all. So I need instructions on how to build a wireway for a sign I’m going to make for a customer. I have experience building and installing cabinets, but cannot find any build info on wireways. I really just need the how to on making the cabinet, as I’m not sure on how the face flush...

Just changed computers and my cutlines are not showing up. I’m testing with files that worked on the previous computer when I go into the spot color library in versaworks 5 I don’t see a folder for the roland versaworks swatches that contain cut contour, roland color system is there and...