Recent content by Snap2000

Place the syringe into the bottom of the dampers themselves, where the dampers hook into the printhead. The dampers hold the pressure, so you can unmount Duct Assy off the printhead while pressurized. But before you take anything else off you must depressurize the system. When the printer is off...

I've done the replacement. You can use the Epson service program to depressurize, but you can also "manually" with a syringe depressurize the ink system to save some ink (and money). Google DUCT,CR ASSY.,CE45,ESL,ASP- 1911065 / 1833938 for $560, or look on CompassMicro for the part. Then use the...

I know I made this post years ago, but I finally decided to update my Summa firmware to 25-04-2024 version 028. Adhoore was correct as you can still set FlexCut to Fast using the Summa Cutter Control software.

How many rollers do you have on your Summa? I don't think it's a difference between OPOS Cam, because I have the standard OPOS and it does the same thing. Some days worse than others, but I really think it has to do with the rollers. I've noticed you can exaggerate the issue by placing the...

My Summa S2T does the same thing, and I also use Substance vinyl. I haven't found a fix but I think it may have to do with the rollers slipping on glossy vinyl, but I'm not sure. Seems to work a lot better with 30" rolls for complex cuts.

I know this post is a few months old, but making your own profile with an i1pro spectrophotometer makes a world of a difference for hitting reds. Also knowing what profile your using helps, for example the True Rich Color 2 preset in Versaworks is really just RGB: AdobeRGB1998 colorspace...

So I upgraded the firmware on my S2 T140. Easy process, I've done it before with no problems. Latest firmware is version 026 from 04-19-2022. After I upgraded I found out that on the newest firmware they removed the "FlexCut Mode" button in the FlexCut menu, this also removes the options for...

Glad you were able to get it somewhat working, the Summa throws a fit with the holo material. Coming back to this thread 4 months later, I was able to get holographic to cut correctly, but only for one row of decals. At two rows it would always be off by a large amount. I must say I'm...

Great. I guess I'll be waiting for that someday, and if Onyx will ever add OPOS Xtra. Flexi already added support for it 10 months ago. I guess my only option is to print unlaminated holo, or manually make files in illustrator that have a white flood under Summa marks. Which also doesn't work...

Thanks I will have to try that, I also wonder if putting little squares of matte lam over the scanning area would help as well. I'm using the printable holographic material from BigFishDM, it's VERY reflective stuff. Looking at it closely under a x20 magnifier, it has a rough surface I'm...

A few things I discovered today: - Increasing the registration mark size helps a lot, a bigger size that covers the entire sensor helps it differentiate between black and white (I used 0.30") - OPOS auto media calibration is useless - You can calibrate the sensitivity manually by switching...

Spent all day today trying to get the Summa S2 to print-and-cut on holographic vinyl. I've tried everything, OPOS media calibration, with and without the yellow OPOS-filter. Looking at the OPOS monitor, every time it's over the holographic media the sensor jumps around from 200 to 1500 when you...

Well I bought it so no going back now, hopefully it works out!

There seems to be a lot of posts about the early issues, but they're really isn't that much information about the Epson's online compared to other brands. It is a S70670, inks were flushed out before put in storage. Orange+ can be installed with the latest firmware correct? Does it solve the...

Hello, I've been looking into buying an S70670, and was wondering if I could get some feedback on your opinions of it? As well as how it compares to it's replacement, the newer S80600. Any info on the print quality and issues with the s70 is appreciated. I know that the s70 is a older model now...