Recent content by StickyBandit

Check your speed on your machine, you may be running too fast. I have a XC-540 which did a similar thing.

Definitely a network issue. I had a wireless connection and had the same issue. The second we went wired the problem stopped.

Weird Things are happening Swapped the cyan and magenta head cables. In service mode I did a test print and came out like below. Turned the XC-540 off and swapped back the heads and does this in service mode Here's where it gets weird. Turned the power for about a hour, unplugged everything...

Yes, we pulled the fuse to the lights because the light magenta is bad and misfiring. Had to use the printer to finish a job. We use mostly darker colors so it didn't quite affect the print we needed to get done. I'll check the manifold to see if they are cracked or damaged. I'm thinking worst...

I got new cables and changed out the old ones to the head and and the head stopped streaking across the media, but I think I just lost half of the cyan. Checked if all the connection are tight and tried swapping the channels to see if it was a headboard issue and still the same issue on the...

please see pictures , have cleaned several times and routine maintenance, and treated for static. We had the headboard changed because the magenta color started to do a similar thing. Also had the main board serviced. Clueless now.

Let the print air out for a day or two. Gotta think of it like a tattoo. After the vinyl dries, it cuts great.