Recent content by Tshof

We just b We just bypass ours. Have been for 5 years. Still running strong. Even our tech knows we do. Never a problem unless we forget to punch the button l

We will shut ours off but as long as you maintain the shaking of the whites it will be fine. Even doing the white maintain option as well will be OK. This is also coming from a technician from pds.

Check your environment make sure your temperature and humidity are correct. Also you change the dampers but before you did that did you purge the air out of them with the damper tool. Also do an overflow maintenance. And if needed a sub tank maintenance. Check your capping stations make sure...

We have the same machine. Work high look for anything that's infront of the laser beam on both sides. Any fuzz or partials on the jig and make sure your material is all level. LD Won't really do much depending on your downloaded profiles. Also check your laser return sensor. If dirty it will...

This is banding. Do nozzle wash and even a custody wash will help sometimes. Temp fixes you can up your passes and resolution. Print time is longer but it works. Also check your feed comp.

I have a different uv machine but we use a basic flushing liquid or mimaki number 11 and 15. Some techs will use equal parts of water and isopropyl alcohol (70).

I have one. You can also join scribd and have almost anything you need at your fingertips. I have a ujf3042 and 4 ujf6042mkii that I run at work.

Having a water route error. Purged air from line pump looked like it was struggling but was working. Tubes weren't as warm but we had powered off for a bit. Anyone have the same thing before. I have ordered a pump and will replace that but was wondering what other issues could cause. Water...

Ever get a service manual?

Mine read 15. Was this your issue not enough positive pressure?