• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by wolf2x

  1. What to buy?

    "However, Mutoh itself uses a different parts/repair company then SW." Signwarehouse and Mutoh use the same parts/repair company. The company is called G.E.I. Calgraph and they are the only ones that Mutoh contracts with for parts and repairs. Usually what happens is that Mutoh overnights...
  2. Ink Problem?

    The ink level in your dampers should be around the horizontal bar. If they are almost full or almost empty then something is wrong. Take a look at them and let your supplier know that as well.
  3. Graphtec FC 7000-160 Contour Problem

    For the MAC, you will need to get a keyspan adapter (usb to serial).
  4. Problem with My versacamm and Flexi 7.5

    Here are some things that I do to get good prints: If you are printing raster (photographs/bmps/tifs) images, make sure the profile matches the media that I am using. If I am printing vectors, I turn off color correction - 100% the inks under the linearization button - on the color tab, I reduce...
  5. New to digital/flexi color/print problem

    From my experience, you will never get nice bright colors when you are printing on clear vinyl. And, as Baz stated earlier...different media will give you different results. Also, different profiles will give you different results. Since you are just beginning, the smart thing would be to...
Top