• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by xlposzter

  1. vs 640 deflected light cyan with new head - striping

    Hey, after the soak, and so many cleaning cycle it become nearly ok, but not 100%. The printouts are sellable at least.

  2. vs 640 deflected light cyan with new head - striping

    the captop is also new oem, but it worth a try, now its on its soak then try cleaning as you mentioned. Thank you for your help! I'll update as it has any result.

  3. vs 640 deflected light cyan with new head - striping

    Thanks for your reply. Dampers are oem new, fresh ESPRINT refillable ink is in use (the same as the previous head use - wit no problem - teh cause of change was headstrike). The striping is worse on high quality setup. On high speed printig with high head setup it is almost unnoticeable.

  4. vs 640 deflected light cyan with new head - striping

    Hello again! I'm with the problem below: VS-640, new head, new captop, headrank OK, bi-DIR ok, Calibration ok, but the light cyan is unfocused as seen on testprint, It causes striping on normal pintouts. Is there any suggestions to elimanet this issue? What sould i do? Thank you for your help!
See more
Top