Search results

Javila I do not understand this statement because I have laid out things at 72 PPI and printed at 720 x 720 DPI as well as laid things out at 150 PPI and printed at 720 x 720 DPI.....There is a noticeable difference in quality so one (in my eyes) obviously has something to do with the other when...

So I have been watching this thread for a while and wondering one thing that hasn't really been touched on and just curious about. You are printing or producing these files at 72-100dpi but at what quality are you printing them at....Billboard(360 x 720dpi), Standard(720 x 720dpi), High...

How Long have you had this machine? Was it new when you bought it? Did a Roland Service tech install it? Did you recently have the cutting carriage or any major parts like that replaced recently?

Is this the first time you have tried to do this type of work flow with this machine? I think I might have an idea of what it could be...I need to pull the service manual here in a little bit and confirm something you might need to do / adjust to help with this.

I have a Roland SP-540V and I believe in VW in the preferences that there is a way for you to turn off VW settings and use the printer settings instead. Also I know from time to time I go into the menu panel and to the vacuum section and some times turn it from auto to 100% which will give you...

I would suggest printing directly to the vinyl and then applying the material to the magnet. We have a Roland SP-540V and that is what we do every time we have any type of magnetic material to produce for a project.

We have had this problem as well from time to time. From what we have figured out it is a communication issue. IF you are running your machine through a router / switch then try and add an additional Ethernet card to your computer that you will set up specifically to run your machine directly...

Hey Everyone I need to find some steel mill ladles in vector format and any other steel mill vector artwork I can. I haven't had much luck and thought maybe someone on here might know where I can go to get some. Any help would be greatly appreciated. Thanks in advance.

I am getting ready to do some tests on this material and start using it what type of pre and post heat temps have you guys found that work best. When you say make sure you let it outgas a lot are you meaning more then normally(meaning about 24 hours) ? Also when you cut any suggestions or...