Search results

Yess, on all three of them :)

Everything here is in the same network. :-) On a Cisco SG200-26P Thanks for you're suggestions and time :thumb::thumb:

You won't believe this, so this was not a network problem, but a PC problem :-o The port to the plotter was blocked by the firewall :-/ Probably due to an update. Tried setting on PC 1 and that worked, PC 2 not yet. Adjusted the same setting there and voila everything works again. I'm as...

Server restarted, everything was powered up, still no change. I connected the LAN cable from the plotter to another port on the switch. This results in PC3 also being unable to connect. IP address read on the plotter and this is still 192.168.1.151 It makes no difference whether I set it to...

I did try this, but still no connection :-( I think I'll just shut everything down now. Everything from the power, then start the server first, and then the PCs one by 1. To be continued

I can indeed see it now, yes. I have tried to connect several times. When I now read the plotter info (on the plotter) I get ip 192.168.1.151 If I enter this IP address on PC3, I cannot connect to it either. Only on PC 1 and 2 I do not have the option to enter CG-SR3 at LAN

Good morning, For a while now I have been unable to get a LAN connection with our Mimaki CG130 SRIII. We work with 3 PCs and they are all connected to the plotter via LAN. Now there are only two PCs that inexplicably can no longer connect. The oldest PC is still connected and we can also work...

Da's nou typisch reclame