Search results

Anybody know why I’m getting blotches of less ink transferring? I’ve gone up in temp but not helping. Normally I’m at 200deg 55 secs. Tried 205-210 for 60 secs and some presses leaving streaks as per image. Tried orange pad, the beige foam one that came with press and nomex felt. As if it’s...

Can anyone recommend a cutter for cutting twill? Numbers and logos for jerseys? Is there anything that can also create stitch files? Currently I use Ioline 300 flatbed for both but they have shut down. If anybody uses a laser cutter how do you create stitch files? Thanks.

If anybody has parts printer selling parts I'm having difficulties locating these parts? they attach to maintenance base to lock carriage at home. D-31,32,33,34,35. I would also be interested in main board.

Anybody offer ink unlock services? My epson chip on main board blew. Had the board repaired with new chip , and couple transistors found faulty. Upon start up the same epson chip blew up, loud pop. This board was already assigned with files to allow me to use dye sub inks. Im in process of...

Janome mb4 was given to me but the Rcs screen will not turn on. Stopped working after update was told. I see that to operate the machine the Rcs screen is optional. manual says a computer can be used. Im unable to find a screen to purchase so wondering what kind of software will it need to run...

if anybody can help Im out of ideas. Converted 1624 to dye sub ink. Did a very thorough flush. Lines are very clean. Install new dampers, M station and foil ink bags. Turn unit on all lines are pulling ink except one magenta. Did nozzle check and it is very good aside from that single magenta...

It’s been a busy month with issues can’t seem to get on track. I dropped the front cover on my rj900x and the power went out. Cannot turn machine on anymore. I unplugged it over night and still nothing, as awhile back had a similar incident with losing power but was able to restart after...

is my print head toast or something else going on but my prints have bleeding or ink migration past the edge of the print. As if fine dust of ink is falling or spraying the paper where there is no art. Its ruining all my prints. First I thought it was pressing issue but after inspecting the...

Anybody try (oil, electric) Drum roll to roll press? Cut and sew high volume print plus press. Looking to buy one but have never seen one in action. Are transfers good quality? My flatbed presses are from China and still functioning after 10 years so was going to look there as I see them ranging...

Im battling with my Mutoh rj900x and cannot seem to find solution. I keep losing 1 channel of Cayan during print. If Im lucky I may get hour of both cayan but eventually will drop out. Entire channel. Do a handful of cleans and I get it back. Then During print it drops. Then I get it back and...

Im looking at a jv30-130 to convert to dye sub. Was told it does not use expiry chips...Will use BIS ink set up. Ive never owned a Mimaki only Mutohs and have a question if anybody can answer before I purchase. Must you use all 8 carts? Can only 4 be inserted CMYK? If all 8 are inserted how does...

Can VS 300 be converted to a dye sub ink? I guess my question is can you buy ink carts for that application? Or only solevent ink. Or refillable ink carts? Ive done with mutohs then had the printers unlocked but this is my first Roland machine. IF anybody knows....

Anybody have luck fixing maintenance stations? I have more than half dozen of these some less than year old. Motor, pump works but will not pull ink. New caps did not help either. Anyone try to replace tubing inside pump? Can’t see anything else going wrong. Or should I just toss them. Im...

My sublimation printer maintenance station will not pull ink. I installed new cap top no luck. New station and still no go. Dampners are new and have ink in them. Tried pushing cleaner through head and not clogged. Head is seated nicely. Anybody know how to trouble shoot this? Lastly, if I push...

Im a new Roland owner and my machine was supposed to come with versaworks and then that part didnt happen. Roland dga does not offer support for my machine and version 6 is not compatible. Where can I buy software to start using my machine and which version should I look for? VS540 machine. Thanks

Hello, I just spent a fortune for a vs540 and the seller promised to include versaworks but now is saying he does not have it. I tried to get help on roland dga but they no longer offer support for my older SN. I tried to purchase version 6 but also not supports my machine. My machine is sitting...

Can anybody give me insight if it’s necessary to put solution on cap top daily/weekly? To keep lines clean. It’s my first Roland and where I purchased it they said not necessary. My Mutohs if I miss a week it raised havoc unclogging my pump and lines. How does Roland do it if it’s true. Vs540.

Anyone know of any software that can help with making my 2d apparel designs into 3d? Had a guy doing it for me who’s no longer available . Things like hoodies, jerseys, shirts etc.

Lost my cayan color on Mutoh 900x and tried pulling ink through dampener and no luck. Then I realized the refillable cart ink was like jelly. So thick it would not flow. All other colors were fine. My ink is high quality and not cheap. Anybody know what made it turn into molasses ?

Hi Im having a hard time getting a good print with the 1304 eco ink. We mainly do dye sub printing, but odd times we need to print on digital heat transfer or make small stickers. Decided to get something used for the rare times I need it. I attached pictures, its very grainy and looks awful...