Search results

There's a couple of places I could have put this thread (Latex printers, Flexi, and here) but since color management is the primary theme, here it is... Color Profiling in Flexi (v24) on HP 310 I'm a complete newbie to color management in printing and have only previously designed everything...

I'm trying to figure out how to get accurate color from my HP 310 latex printer which doesn't have a spectrophotometer. I have a line on an X-Rite i1 Pro (v1) for like $300 but want to be sure I can use that to calibrate my monitor and printer output colors. I'm using Flexi basic HP edition...

Printing on HP 310 with Flexi Basic - Printing reverse image on clear laminate. - Mounting to glass/plexi. - Backing with thin white vinyl. I started with the generic adhesive backlit profile and ran calibration. Ended up with 2 profiles - 20 pass at 130% (probably could have gone to 150% but...

Have quite a few parts for HP Latex series 300 printers. (Might fit others but you'll have to cross reference.) Prices are less than half used part prices on ebay. Parts came from an HP360 parts machine taken out of service with a bad power supply. Shipping is from Phoenix AZ and I use...

Finally got my old Ledco Econocraft 60 loaded up and I think it's running ok. I amd gettign occasional small 'bubbles.. maybe 1mm in size but more like no contact than a bubble. If I rub a little it disappears. I'm pretty sure my roller pressure is out of whack considering the age and care of...

The cable on my parts machine take up reel was badly damaged at some point. The wires were so short from the connector I couldn't trace them to the pins easily. I was able to cut apart the connector and I believe I traced them correctly. Rewired a new connector to the take up reel motor and...

Anyone have one of these that can give me some tips on getting best results out of it? Manuals available are kind of weak on details. I'm sure both of these need pressure adjusted but manuals say they're set from the factory but that was a long time ago, they probably need an adjustment. Also...

Does anyone know where I can get replacement rollers for a 60" Ledco Econocraft? Seems they can be bought from the manufacturer new for $600 after a core charge. Maybe I can spec them out and find a china supplier? Anyone ever done that? If anyone has one of these not working and taking up...

Trying to get my printer connected to PrintOS. Printos.com asks for printer ID. Go to Settings > Setup > Printer Data Sharing Agreement > Warranty Activation and Services But after it 'thinks' for a minute I get this error.... Printer is on the network, I can see it in Flexi, all network...

Newbie color management questions. Pretty happy with how my 310 repairs have turned out and I'm starting to print. In order to gang everything up with overlaps I've brought all my art into illustrator, CMYK color mode. In that file I have some vector art created in illustrator and some...

As title states. Trying to see what this film looks like in person. Called Hexis.. they said call distributors. Called 6 distributors on thier US list, nobody has a sample. Metrorestyling only sells the whole roll. Not dropping $1300 on a roll I can't see first. If anyone has a small piece of...

Parting out HP Latex 360. Was taken out of service due to a shorted power supply. Machine is dirty but will clean the parts best I can as I pull them. I have no info on the life of this printer as I bought it for parts for my 310. Parts are obviously untested but Ive used the scan axis motor and...

Looking for someone who has a roll of this and wouldnt mind selling and sending me a foot of it so I can test to see if it gets close to matching an existing project texture from 20 years ago. I'm in Phoenix and would appreciate this greatly. Thanks.

New to large format printing. Have an HP 310 latex. Since I'm new to getting into all this I don't have a distributor persay. I head over to my local Montroy for stuff but don't yet have an 'account' so getting samples might be tricky. I'm desperately looking for a textured overlam (or textured...

Picked up an old Summa DC3 thermal printer that was sititng in a covered garage for many years for free. Cleaned it up to see if I could get it running for the hell of it. it. Was. Filthy. Unfortunately guy didn't have the dongle or software so even after getting through a bunch of errors I...

Anyone have parts for a DC3 laying around. I picked one up free with a few ribbons and trying to get it running for the hell of it. Looks like it may need something related to the print head replaced when looking form the back.. not entirely sure yet. Not looking to spend a lot but if you...

Finally getting around to replacing the broken carriage belt on this used 310 I picked up as I was told it was printing before it broke. I pulled all the print area platen pieces to clean the vacuum holes.. most were ok but ones on the ends were plugged up. In the vacuum channels there was...

Looking for a spindle with or without hubs, 2 or 3 inch. Will need it shipped to Phoenix. Thanks.

Anyone have a spindle (with or without hubs) for an HP 310 54" they care to part with? Would need it shipped to Phoenix. I was a little sketchy on whether I could make a post requesting parts so if this isn't allowed, let me know. Thanks.

I have a HP 310 latex that's new to me and acquired a HP 360 that I'm told needs a power supply. It's been in storage a while so I will probably just use it for parts. My 310 doesn't have the take-up reel assembly and wondering if I can install the one form the 360 on my 310. (Obviously with the...