Search results

What was the final resolution with HP?

You might look at the heat settings for the reflective. I had the same problem years ago. If your AC blows on the printer, it can cause your printer heaters to get hotter than they needs to be for the material and cause the same issue.

Sometimes you can use 99% Alcohol. Saturate it and cover it up with paper towels and saturate the paper towels. Let it sit for five minutes or so. Use a plastic razor blade. Works most of the time for me. HP UV inks come off most substraights with alcohol. Not sure if this will work for...

All you state is true. For clarification also, a sign shop does not have to an Electric Sign Contractor licenses to buy and sell an electrical sign.

Sign Shops can sell electrical signs in Texas Per my conversation with Larry Reichle with the Texas Department of Licensing and Regulation - Compliance Division, Texas Sign Shops that are not Electrical Sign Contractors or have a master electrician on payroll can still buy and sell electrical...

Just make sure you have a liner take up. The prints can either feed out on the table or the floor.

I have subscribe to a company like this in the past. They will give you a directory etc. but I never got any leads or any thing else. Save your money.

After reading this post and trying a few things, it got me thinking. I need to check the lenght of the printed job. It was too long. I adjusted the length of the image to match that of the print, re-ripped it, and it completed the job fine. This is do to the feed rate on the printer not...

If you do not use the crop marks, you can print without any spacing. Also, playing with the conserve media and group together will give you different results. There is a layout tool in Onyx and it is not hard to use.

Very nice!

I am hoping so or I am out a lot of money and I already have one pissed off customer.

Signetics? FYI - Their address on their website is incorrect. Their address is 2001 Kuntz Road, Dayton, Ohio 45404. Know I need to find out if they are still in business or have taken the week off to go to the sign show.

I understand that you are in Dayton, OH. Do you know what has happened to Signetics?

Does anyone know what happen to Signetics in Dayton, OH?

Does anyone know what has happened to Signetics? I ordered a sand blasted sign from them and it was to be deleivered last week. I tried to call them and no one answers or returns messages.

Up to now, I have had great success with the ION. Colors are great, the inks stick well, and now running at the fastest speed for 4mm coro signs with great success. I am hoping it was just a bad batch of ink. I bought this machine to print on MDO. I am now selling alot more aluminum and coro...

Are you using a laminated film or liquid lamination?

On some but not all. I tried laminating but unless you have a full graphic covering the whole MDO board or aluminum, it creates air gaps where there is only white next to the print. I do not even try to laminate coro. When I bought this printer, it was to get away from laminating and sold to...

I now have had my Gerber ION for 26 months. When all the fading issues were being discussed in November of 2009, I thought it must be a fluke. Now I have customers coming in complaining about their signs fading. Red is the biggest issue and then yellows or light colors. I use the ION on all...

I have no problem printing on MDO. I have gone to painted both sides. This gives you the option of which side to print on. I also started buying my MDO on pallets. This helps elimate warpped boards and figure prints. We use white gloves when handling the material. We print on a Geber ION X.