Search results

Hi guys, I have Roland fj 52, that has not been used for about two years. I cleaned the ink system but the heads are totally clogged. I would like to test it with some old heads, before buying new ones. Does anybody keep his old heads and can borrow them for a try. Or any other proposals? My...

Hello guys, My Roland SP-300V keeps on showing either SHEET SET ERROR SET AGAIN or PINCHROLL ERROR INVALID RIGHT POS or LEFT POS. My pinch rollers are on the correct locations. Does any one knows if this is some cable or some snensor that is out of order. OR maybe some adjustment should be...

Does anybody know how to disable the automatic cleanings of Roland SP-300V. I mean the cleaning that it does every morning, and after every switching off the power.

Hello Everybody, Just after I replaced the CK head my YM makes another problem. I post a photo of the test print, the vertical and the horizontal testprints. The M/Y head makes some kind of waves, and ofcourse because of that isn't printing well. The problem is not in the head cables and not in...

jhilldesigns - i tried to attach the images 5-6 times but had problem with my upload speed, that's why. Thank you for answering but unfortunately it is not the encoder strip. Tried my old head and everything was OK, except the bad nozzles. The cables and all other stuff is working OK, it's just...

Hello, I have a strange problem with the black colour on the black/cyan DX4 head. The test print is almost OK, as shown on the picture. http://img146.imageshack.us/i/071220101083.jpg/ When printing the cyan is OK but the black is mirrored and shifted - above and below from where it should...

Just found transistor that is down: 2sc4131 I can't find it anywhere in Bulgaria. Does any one knows where can I find it from?

SW Power board is not the problem as it's only job is to supply 41 volt to the system so no the problem is not there but thanks anyway

we disconected the two flat wires connecting the print head board and the main board on CN10 and CN9 and the fuses still burn, now we are tring to determine the cause of if Actualy only the fuse on head 0 is shorting out so we are tracing it down will post when got sometning new if someone...

Optic, which transistor do you think has failed?

Hello Everybody, I am using Roland Versacamm SP-300V for maybe 3 years. I have manually removed the heads for cleaning already two or three times, but when I did it yesterday the printer didn’t want to print. Here is what I did and what happened: After I switched off the power removed both...

left+down+right+POWER ON