Search results

Having trouble with SignLAB files

Hi, Could anyone help me out by converting a SignLab file to a simple vector file so I can open it with FlexiSIGN? Thanks!

Hey Thanks for the help. Im using the same ink as the previous print. Not sure about the profile tho, although I never change that too much so I would think its the same one. My nozzle check looks pretty good, Im missing just a couple spots in the red, otherwise its good. I went to a 1440 x...

Hey, Im trying to print a design with a dark gray to light gray gradient in it. When it prints out it don't look right, I have some stickers with this design leftover from the last time I did this job, and they don't match. The dark gray and light gray are both lighter than they should be...

Thank you for your help! Something or a combination of things has atleast got it printing somewhat. Im still missing a few of the nozzles for the magenta. I soaked the head today, cautiously squirted cleaning solution thru the manifold, tried hooking 2 syringes on the drain tubes going to the...

So I just pulled the head outta its carrier.. not sure if I used all the correct terms there but, I'm real sure that I can see the nozzles for the black, cyan, and yellow, but I cant see anything for the magenta ones, I can kinda see the lines of where the nozzles are supposed to be but cant see...

Thanks everyone for the advice! although, I still haven't gotten it to work. I have done the little charges, I soaked a piece of lint free cloth and put it on the maintenance station and then set the head down on top of it, and after each I have done nozzle checks(but got no magenta ink outta...

Yes there was air in the lines, I have never flushed my heads... how does a person do that? Not sure about any obstructions.. when I hooked up the syringe it didn't seem to take too long before I had ink coming. I haven't had much trouble with this printer at all so I don't know much about the...

Hi, I recently finished printing a 13' long wrap and just at the end it quit printing red. And now will not print red at all, I changed the cartridge after it quit, today I took the lines off just above the damper and pulled the ink up to them with a syringe, but still cannot get it to print...