Search results

Update: Problem solved by installing more pinch rollers and cleaning the rollers. Also using the ICC profile. Temperature 36 and 42. Unbelievable

Update: Replaced M/Y head, installed original dampers, original cap top. Still the same problem

...

I printed CMYK color pattern. I turned off the C/K head and printed complete CMYK + BLACK (C:100+M:100+Y:100+K:100) Pictures attached. Then I turned off the Y/M head and turned on C/K and reprinted CMYK + BLACK (C:100+M:100+Y:100+K:100) Attached images. After that I turned on all heads and...

Here's some new info, I tried unidirectional printing, high quality, slow down the speed... But still the same problem

Unfortunately, it still happens, I also put the black color in the graphic preparation as C: 0 M: 0 Y: 0 K:100

Hello, True Rich Color 2 matched my colors. But the printer still leaves me faint lines that are not constant. K/C PRINTHEAD REPLACED / CABLE HEAD DUMPERS ON BOTH HEADS REPLACED CAP TOP FOR BOTH HEADS REPLACED The problem occurs on almost all materials Please help

Hello friends, I have problems with the Roland SP-540i plotter. The first problem is that I don't get such good and strong colors. The biggest problem is with black color, I use Preset: Signs&Display. The problem with this mod is that the black color is very pale, and the other colors are okay...

Dear, I have a problem with printing on city light and blueback paper on Roland SP-540i, I tried various profiles but I could not solve the dot printing and color spillage (one color entering another), I tried several rolls but the same on each. Could someone help me, I tried to reduce the...

and since there is no intelligent pass control on the Roland SP-540V, does this mean that it will print lines even when it is in high quality, or if one nozzle is missing, can you explain to me the intelligent pass control on the Roland sp-540v, which does not have it ?

Hello, today I was cutting something on the router and it happened that I let go of the cut and did not adjust the depth of cut correctly, however, I left the building and was doing other work while he was cutting, and the depth of cut was too great, and he literally cut the substrate as well ...

Hello everyone, Last year we bought HP Latex 360, the price of consumables for it is color 770ml - 140e head - 140e Maintenance kit - 160e Can you help me, this seemed too expensive for us to maintain and a lot of consumables which are very expensive. The heads are mostly changed at about 3-4l...

Hello everyone, Last year we bought HP Latex 360, the price of consumables for it is color 770ml - 140e head - 140e Maintenance kit - 160e Can you help me, this seemed too expensive for us to maintain and a lot of consumables which are very expensive. The heads are mostly changed at about 3-4l...

Hello everyone, Last year we bought HP Latex 360, the price of consumables for it is color - 140e head - 140e Maintenance kit - 160e Can you help me, this seemed too expensive for us to maintain and a lot of consumables which are very expensive. The heads are mostly changed at about 3-4l...

Which consumables do you use more? Is it just a maintenance cartridge or more ink?

Hello colleagues, I have an HP Latex 360 and I have a small problem with one C / K head, so far I have printed everything with 6 pass, but as there was a problem with one C / K head, which leaves almost all lines on the test board only slightly cracked through the head less than 2 liters of...

Hello colleagues, can you help me a couple of months ago I bought a used HP LATEX 360, I put all the new printheads, I currently have a problem with the C / K head, suddenly the Black color / head started to leave lines, I did a lot of cleaning but it's still also, then I took out the head and...

Hello, I have had an HP Latex 360 for 6 months now, bought second-hand. Suddenly the black color left the lines it happened, when I finished printing 5m2, immediately after that I released the new 5m2 it happened that the black color leaves the lines and until a few minutes ago everything was...

A good knife holder has been chosen, the offset is at 0, the head does not walk, and almost every time it does not swell well and does not cut well along the line, almost every time in the same place

Hello everyone, I almost took the Graphtec cutter CE5000 - 60, I have a problem that when it cuts along the line, it escapes a bit, by about 1mm, and I have a problem that it won't finish the floor until the end, it escapes a bit. Can you help me, is there any calibration, etc .. I cleaned...