• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Versaworks Issues

    The Preserve Primary Colours is selected. This makes no difference if on or or off, besides only CMYK are primary colours on this machine. SC
  2. Versaworks Issues

    I have colours printing that should be pure yellow but have a uniform cyan slight print when looked at with a loupe. This is giving a slight green tinge to my yellow prints on my Versa Express RF-640 4 colour which is just over two years old with a perfect test print. I am running Versaworks...
  3. Digital Print Material for Garage Doors

    Many years ago we dealt with a company in Italy that made a banner vinyl that was perfect to graphic up Curtain side wagons. After using this very successfully for a number of years the company that was selling this launched a new truck vinyl which was made specifically for curtain sided wagons...
  4. Digital Print Material for Garage Doors

    I have previously used Avery MPI 2800 on these doors and after 3-4 years it looked as good as the day we fitted it. We replaced these prints just before Christmas with the same Avery MPI 2800 and it is all ligfting on the edges and joins. I have since found out that Avery have changed the...
  5. Digital Print Material for Garage Doors

    This has more of a leatherette effect than a pebble texture almost like building steel cladding. SC
  6. Digital Print Material for Garage Doors

    I have some large garage doors that are steel with a textured pvc facing that want some contour cut vinyl prints applied to them. What would the mprint media you would use for this type of job? The reason I am asking is what has been used before has not adhered very well especially at the points...
  7. Yellow Ink issues

    When printing Yellow on its own it prints perfectly but when it is touching another colour it can bleed and make the image look blurry. Heat settings are as high as they go, even when I alter them it is not making any difference. I agree it is a bad batch of ink but the supplier is not accepting...
  8. Yellow Ink issues

    I have a Roland VersaEXPRESS RF-640 4 colour machine running Nazdar inks. I have posted this on the Roland forum but I am trying to see if anyone has similar issues? My print test is perfect. It is as if their is an issue with the Yellow ink as it seems to not mix well with other colours and is...
  9. RF640 Losing Channel

    I had the cap top replaced on mine and the issue has been fixed. Eventually all of the colours failed, which means it wasn't getting a good seal. SC
  10. Wrong inks

    I was just wondering as there are no profiles for Max 3 on the US site. SC
  11. Wrong inks

    Are Roland MAX 3 inks available in the US? SC
  12. Wrong inks

    ?
  13. Wrong inks

    Nazdar state they make a MAX 2 and MAX 3 ink. On a further note. I was on the US Roland Profile site and there only are profiles that are specifically for MAX 2 inks and do not show MAX 3. The European site has the choice of MAX 2 & MAX 3. Are MAX 3 inks not available in the US? SC
  14. Wrong inks

    These are Nazadar inks on a RF-640 4 colour machine. My nozzle test is perfect and it has been checked by a Roland Tech and it is printing and aligned perfect. SC
  15. Wrong inks

    A while back I had a set of inks although marked externally as Max 3 when installed came up as "wrong ink type". The supplier reckoned "the wrong chip had been installed" and sent others out to replace them. My ink issues are as if some inks are not mixing as they should and leaving a mottled...
  16. Wrong inks

    This is an ongoing thing which I am trying to work out. If I was supplied Eco-Sol Max 2 instead of Eco-Sol Max 3 and used it in my machine. What is the issues and problems I could encounter? I think my supplier has sent me the wrong ink and it is causing issues. SC
  17. Ongoing Print Issues on my RF640

    Thank You. Roland would like me to do a complete flush but I thought that was a bit excessive and expensive. SC
  18. Ongoing Print Issues on my RF640

    Do I need to flush or clean my system switching back to original Roland Max3 inks? I understand i will need to run a few cleans and cross contamination between the inks may be an issue. My inks as they stand are:- Black one cartridge 0% one cartridge at 75% Magenta one cartridge 20% one...
  19. Ongoing Print Issues on my RF640

    The supplier of my inks has offered a few options. 1. Change the printer back to their version of Max 2 inks. 2. Run it with a futher batch of their Max 3 inks and see if the problems persist. 3. Return to using OEM Max 3 inks. I am a bit wary of changing to Max 2 as I feel this will affect...
  20. Raster and Vector Image Customer Rant

    I can only say one thing canva.com !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Four times today I have issues with files from Canva. This is making people think they are designers but certainly is not helping us the signmakers/large format printers. SC
Top