• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

position

  1. Change Home Start Position Origin Permanently by a few cm on the Graphtec c7000 Plotter

    Hello - I am really hoping someone can help me with this problem. We use the machines for one thing only which is kiss cutting stickers on a A4 sticker sheets: We use a cutting mat and place the A4 sticker sheet on the mat with registration marks printed on each of the four corners of the...
    • Rextherunt
    • Thread
    • blade adjustments blade starting ce-7000 graphtec graphtec ce7000 home plotter point position start
    • Replies: 1
    • Forum: Newbie Forum
  2.

    Flushing Position Adjustment for Roland VS-540i ink dripping out of left side of capping station

    I tried a flushing position adjustment in service mode but I notice there is ink now dripping out of the left side of capping station after cleanings (picture1). So when I did the flushing position adjustment it says to press the ENTER key when the arm part of cap unit starts to move which I did...
    • graphicsphere
    • Thread
    • adjustment capping drip flushing ink nozzles position roland station vs-540i
    • Replies: 5
    • Forum: Roland

  3. 1324 printhead position

    WOuld like to know if the print head should be in the down position when placing the printer into sleep mode. I know it will go through cleaning cycles during the night, but my concern is the print head drying in the upward position. I always turn the printer off when finished at the end of the...
Top